1, PN:                  PL-T8-3S-0900-12W

2, Size:                 900*26mm

3, Light sourse :        SMD 3528

4,SMD3528 pcs :       180

5,Power :               12w

6, Working voltage :     AC100-240V

7, Cover :               Clear cover/Stripe cover/Frosted cover

8,Lumens :              clear cover 1100lm

                         stripe cover 1000lm

                         frosted cover 900lm

9, Shell Materials:       Half PC & Aluminums Alloy

10:Viewing Angle:      120

11, Work Lifetime:      50 000 hours

12,Packing detail :      Carton size 100*31*26cm,30pcs/carton

1: Product feature:

u       Special design of light, no visible light spot,, no glare, the light is soft and brightness

u       Environment friendly, no lead, no mercury, no nickel

u       LED light working with low voltage & current, comprehensive protection for circuit, no danger to human body, up to90% electricity transferred to light energy which is 4 times than filament light and 3 times than fluorescent light, more effective, less heat produced

u       No flick, instant lighting, harmless to visual-health

u       Up to 60%-70% energy saving than filament light

u       Well-finished surface treatment for alloy Alu & tough PC used for shell which made the light is anti-pressure and anti-abrasion

u       Perfect combinations of light fixture made the LED light working under low temperature, the lumens depreciation of LED light is 1-2% in every 1000 hours, and its life span is more than 50,000 hours

u       High CRI made the light can be used in industrial & residential & commercial lighting

u       CE , Rohs & FCC certificated

2: Structure

1.       plastic caps: inflaming retarding PC

2.       LED

3.       PC cover: inflaming retarding PC

4.       Pins copper

5.       Power supply: internal power supply

6.       Radiator 6063 aluminum

7.       PCBA

3: Installation instruction:

1,When installing the LED lamp to the conventional fluorescent lamp hanger, please pay attention to the conventional lamp hanger.

Method of installing LED lamp to electronic & inductive ballast lamp hanger as below:

A* When installing LED lamp to Inductive ballast lamp hanger:

1* Take out the starter from the inductive ballast lamp hanger.

2* Install the LED lamp into the inductive ballast lamp hanger directly.

B* Installing LED lamp to Electronic ballast lamp hanger:

1* Take out the starter from the electronic ballast lamp hanger.

2* Take away the electronic ballast from the lamp hanger.

3* Then connect the wire with LED lamp directly.

Be sure the starter is removed before you install the LED lamp to conventional fluorescent lamp hanger.

2, the installation instructions

Inductive or electronic ballast bracket installation of LED lamps methods:

Note: cut off the power before installation.